LENOVO K8 XT1902-3 UNBRICK / DL IMAGE FAILED / DEAD REPAIR

HOW TO FLASH / UNBRICK / DL IMAGE FAILED / DEAD REPAIR - LENOVO K8 NOTE XT1902-3

Welcome To All My Friends

DevolopersGD (NEW ADMIN On this Page)

TODAY in this tutorial i am going to SHOW YOU HOW TO FLASH LENOVO K8 NOTE (Android-7).FULL FLASHING / Tool DL IMAGE FAILED Solution =WITHOUT ANY BOX Very Easy Just follow..

HOW TO FLASH / Stuck on logo / UNBRICK/ DL Image Repair On LENOVO K8 NOTE (Android-7)... This Method Work On .. =FUll Flashing. =Unbrick.
=Dead Boot Repair
=DL Image Failed.
=Stuck On Logo. DOWNLOAD- K8 FLASH FILE-CLICK HERE SP TOOL(LATEST)-CLICK HERE LENOVO USB DRIVER-CLICK HERE

HOW TO FLASHING:-

HOW TO FLASHING:-

• Download all files first on your Computer.
• Then Extract all files Using 7zip OR Winrar (Latest).
• After Extract you will see three folders in side your Extracted download files folder.
• Open USB Driver folder and install USB Driver first on your Computer.
• Then Open Flash tool folder ..
• Now on Flash tool folder you will see too many files or folders.
• Now Don't Worry Find SPFlash tool.exe
• Now after find SP flash tool.exe Run Sp flash tool.exe (program).
• Now a new window will appear on your Pc.
• Now On SPTool find "Scatter Loading".
• Then select and click "Scatter_loading.txt
• Now a new window will open .-now on new window Open your extracted download files folder ->then open firmware folder ->then select "MTxxxx_Scatter.txt"
• Now on SP tool Click on "Download" Button.
• Now on your Device "power Off First"
• Now Press & hold Volume UP and connect your Device to PC using USB Cable.
• Now On Sp tool a "Red Mark" will appearing.
• Then after some few seconds on SP tool you will See "Yellow line" is appearing.
• Now sit back .
• Wait for Finish.
• When Finish you will see an new popup will come and see Download Done.
• Now Disconnect and Power on your Device..
• Your device successfully flashing complete..